6 Mistakes To Avoid When Ironing Your Clothes

Ironing is a process that needs skills and many people often have problems whenever they are doing this simple task due to simple mistakes. If you want to be an expert in ironing, there are mistakes that you must avoid. The following are some of the common 6 mistakes to avoid when ironing your clothes;

  1. Ironing fabrics, which are too dry
    Many people often like ironing clothes with wrinkles without knowing that the wrinkles are often easier to get rid of from the fabrics, which are slightly damp. This means that you have to avoid ironing your clothes when they are too dry if you want to iron the perfectly. You should also remember that it is not convenient for you to iron garments immediately after taking them off from your dryer. You can also use a spray feature of the iron you are using to soften and mist each area prior to passing iron over them. You should make sure that extra stubborn wrinkles are with a burst of the steam. This will always enable you to have humble time when ironing your clothes at the same enabling them to look good.
  2. Save the delicate for last
    You must make sure that you iron them depending on the level of delicacy. This means that the delicate clothes when ironing. You should never start with the delicate clothes when iron is extremely hot since this may make you have hard times ironing. You should make sure that the process goes smoother at the same time avoiding any drips as you iron first the more delicate fabrics, at lower very temperature settings before proceeding to the ones that need higher temperatures such as cotton and linen.
  3. You should crank up the heat
    If your garment is made up of a delicate blend, then you need to select the setting that perfectly matches the delicate fabric that you have chosen. The above is definitely one of the ways that you can use if you want to preserve your garment from the damage of intense heat. You will also have easy time ironing your clothes with facing any wrinkles or damage.
  4. Not to use tap water
    Most of the modern irons can always handle tap water when compared to the older models of irons. This means that you need to make an informed choice if you want to get the best results after ironing with the boxes. Unless the water in your area is extremely hard, you have no reason of using distilled water. If you have the old iron, then you need to use distilled water to avoid stains in your stains. In addition, you can always mix then in the ratio of 50/50 in the areas with hard tap water. This should help you iron your clothes much easier and faster.
  5. Forgetting to clean your iron after use
    You need to make sure that you clean your iron regularly after using by removing the stains that might have stuck on the iron box. This will always enable you avoid the stains that may be hanging on your kitchen at the same time enabling you to maintain your iron box clean. How do you do this? You should try the Faultless Iron Cleaner that will get rid of the residues on exterior of soleplate without causing any damage to the iron’s inner mechanisms. This will help you have a clean iron that will help you enhance your cleaning whenever you are ironing.
  6. Storing iron with dirty water in it
    Many people often keep the irons with water without realizing the effects that the water causes. This can sometimes lead to rust that may stain your clothes when ironing. This means that you need to empty the water in the iron tank prior to putting it away, especially when storing it on a soleplate. This will also help you prevent damaging internal parts as well as leaking through before discoloring its soleplate. This will help you keep your iron clean and stain free thus enabling you to have easy time when ironing.

In conclusion, by taking measures on the common 6 mistakes to avoid when ironing your clothes, you will always have good time when ironing at the same time making your clothes clean and good looking.

Leave a Comment